Assign Elevators

Assign elevators to map the elevator buttons to a floor.

A floor is a representation of elevator cabs and their specific outputs. A reader-output configuration can only be assigned to a single floor.

From the sidebar, select Configuration, and then Floors.
Select a floor to open the Floor details screen.
Select Add Elevators.
On the Add Elevators screen:
1. For each elevator, select the output for the button that will correspond to the floor.
2. Choose “No Access” if the elevator does not go to that floor.
3. Repeat the process for each floor.
4. When all elevators are mapped to the floor, select Done.

Related Topic