Card formats are available to all readers in the system. Card format details provide information about the template used, the badge offset, and the facility code.

  1. From the sidebar, select Configuration, then Card Formats.
  2. Select Add a Card Format to create a new card format, or choose a card format to edit it.
  3. Enter a Name for the card format.
  4. Choose the Template to be the basis of the new card format.
  5. (Optional) Select toggle switch (off) to enable toggle switch (on) the Badge Offset option.
  6. Enter the Badge Offset Number. If the Badge Offset Number is set to zero (0) then no offset is applied and the actual badge
    number is reported.
  7. Choose the Facility Code if there is one.
  8. Select Save to save the new card format. If you exit this screen after entering the information without saving it, you will be prompted to save or discard the card format.




© Honeywell International Inc. All Rights Reserved.