When using the command-line utility Xflash to upgrade any BlueDiamond reader firmware, we recommend using a EZsync006 or 009 cable.
The following color coding applies to EZsync006 and 09 FTDI cables. If using a different cable, refer to the manufacturer documentation for that cable.
Properly wire the cable to the reader terminal
Name | Description | Color | Reader Terminal |
|---|---|---|---|
GND | Ground | Black | Pin 1 - 0V |
VDC | Voltage | Red | Pin 2 - +VDC |
Data- | RS485- | Yellow | Pin 9 - RS485- |
Data+ | RS485+ | Orange | Pin 10 - RS485+ |