Connecting to a multi-imager requires its IP address and configuration of a username and password. Refer to the manufacturer documentation for more information.
From the sidebar, select Devices.
- Above the devices list, select select Add > Multi-imager.
- On the Configure screen, choose the recorder. The protocol (ONVIF) is displayed.
- Enter a descriptive Name for the camera.
- Enter the IP address of the multi-imager.
- Enter the number of cameras.
- For encrypted communication, select to enable the option, Use TLS Encryption.
- Under Credentials, enter the Username and Password to be used for connecting to the camera.
- Select Save to save your changes. If you exit this screen after changes are made without saving, you will be prompted to save or discard your changes.
After the multi-imager is online, the number of cameras is retrieved from the recorder and placeholders are displayed for single camera configurations. If the multi-imager is offline, a warning will be displayed stating that the camera count is unknown and the multi-imager must be brought online to configure any cameras.
Cameras connected to the multi-imager may affect the system operating costs. Contact your VAR for more information.
Training video: Add a Multi-imager
Related Topics
© Honeywell International Inc. All Rights Reserved.