A static IP address may be configured for a gateway or video recorder. This is an option for an environment where device connections are needed and DHCP is not available, or when maintaining both a DHCP-based address and static IP address for cloud access and off-network configuration/recovery.

  1. On the device details screen, select gateway actions menu and then choose Advanced Networking.
  2. Select Show Credentials. The username, password, and one-time passcode are displayed.
  3. Connect a monitor and keyboard to the USB port of the gateway or video recorder. These credentials may be used to log in to the Administrator Console and change the configuration directly on the device.

The default settings are as follows:

  • IP address: 192.168.0.100
  • Subnet Mask: 255.255.255.0
  • Router address/gateway address: 192.168.0.1

If this device is deleted, replaced, or deallocated, the static IP addressed will be removed.




© 2025 Honeywell International Inc. All Rights Reserved.